Welding

H3 - Oerlikon Fincord M
- Mild steel electrodes for fabrication of steel structures
- Smooth welds in all positions except vertically down
- Available in 2.5mm, 3.2mm or 4mm diameter rods
H4 - Oerlikon Silvercord
- Stainless steel 316L electrodes for welding similar stabilised steels
- Available in 2.5mm or 3.2mm diameter rods in dry vacuum packs
H5 - Oerlikon Supercord
- Mild steel electrodes for use in fabrication of steel structures
- Welds in all positions
- Available in 2.5mm or 3.25 diametre rods
H6 - Mig Wire
- Copper coated mild steel wire. Precision layer wound for easy feed and a quality weld. 0.8mm, 1.0mm or 1.2mm thick or 5kg or 15kg reels. Stainless mig wire available on request
H7 - Mig Welder Liner
- Insulated and Teflon coated liners for mig torches
- Available in 3mtr lengths in thicknesses from 0.6mm - 1.2mm
H8 - Welding Hose
- Complete fitted oxygen and acetylene welding hose sets
- Available in 3/8" diameter hose in 5mtr, 10mtr or 25mtr lengths
H9 - Welders Shrouds and Tips
- Full range of welders accessories covering all sizes of tips, shrouds and nozzles for guns and torches
H10 - Cutting Nozzle / Cleaner
- Gas cutting nozzles for acetylene (ANMS) or propane ( PNMS) to be used on a burning torch
- Sizes from 1/16 to 5/16
H11 - Burning Torch 18/90
- 18" long hand cutter with a 90degree head for cutting mild steel up to 12mm
- Cuts using propane or acetylene bu changing nozzle
H12 - Disposable Gas Cylinder
- Single use canister holding 60 litres of gas
- Available in Argon or Argon and Co2 mix